What should be paid attention to in the use of gas detector?
How to choose a gas monitor?
Different gas monitoring detectors are suitable for different scenarios. When choosing a gas monitor, consult the manufacturer whether it is suitable for your scenario to avoid losses. JXCT intelligent gas monitor can be used to detect the gas concentration parameters in the air environment. When the concentration exceeds the preset alarm value, a sound and light alarm signal will be issued to remind users to take safety measures in time to prevent explosions and poisoning accidents. So as to ensure the safety of life and property.
Practical techniques for gas detection
1.Please read the corresponding instruction carefully before use, and be familiar with the performance and operation method of the machine.
2.Check the inlet filter of sundries that need to be cleaned or replaced.
3.Try to avoid collision during use, resulting in abnormal detection data.
4.sensors and other components for precision components. Do not open the cover when adjusting the instrument. Pay attention to waterproof and impurity input during use to prevent data abnormality.
5.If the indicator light continues to light, the display screen suddenly shows countless values, the gas obviously exceeds the standard area, the value does not move, the gap is large, etc., should immediately stop the operation, evacuate to the fresh air area for observation, and eliminate the problem in time, otherwise it is strictly prohibited to continue to use.
6.Clean the surface dust and gas monitoring equipment after shutdown.
7.When not working for a long time, the machine should be turned off and placed in a dry, dust-free environment in line with the storage temperature.
Portable gas detector
Portable gas detector, used in gas storage leak monitoring, pharmaceutical factory, food factory, hospital gas disinfection residue detection, electrostatic collector, gas generator, air purifier, gas leakage, indoor air gas detection and other scenarios. When the detected gas exceeds the set gas value, the sensor will turn on the light alarm, and the high-decibel buzzer will beep. The instrument is marked in red to remind in time for high safety.
Gas alarm control system
The gas alarm controller is used together with the gas detector. One gas detector shall be equipped with a single gas alarm controller, and multiple gas detectors shall be equipped with one or more gas alarm controllers. The gas alarm controller supports sound and light alarm setting, supports two relays control, and can be linked to exhaust air, power off and other behaviors. The gas alarm control system is available in four configurations: standard configuration (real-time monitoring of the measured gas, high sensitivity, accurate measurement); With sound and light alarm (gas exceedance, sound and light alarm); With concentration display (real-time display of detection gas value); With concentration display and sound and light alarm (display the gas concentration at that time, data exceeded the alarm).
