Why is CO transmitter so important?
Background:
Carbon monoxide gas is odorless and odorless and is found near gas combustion devices. However, there is no provision for penalties for failing to install a sensor. The device will trigger an alarm as soon as it detects carbon monoxide. If a caller reports illness or any other worrisome symptoms, the responding team will wear a gas mask. A simple alarm prompts the team to carry a device that can determine carbon monoxide levels. The symptoms of gas poisoning are dizziness, headache and nausea. A good sensing device will indicate the level of carbon monoxide present in the environment. JXCT CO transmitter can be very helpful for monitoring.
Indoor CO detector alarm
The CO alarm adopts imported first-line major brand chemical sensors, which have the characteristics of rapid and sensitive response, strong anti-interference ability, long life, high precision, high repeatability and high stability. The carbon monoxide alarm detector is suitable for detecting confined living places: The concentration of carbon monoxide in agricultural greenhouses, production workshops, indoor barbecues, agricultural breeding and other environments.
Detection gas：Carbon monoxide(CO)
Measuring range：0-1000ppm (default) /0-2000ppm
Resolution：0.1ppm
measurement accuracy：≤3% of reading
Response time：Generally less than 15 seconds
Detection principle：Electrochemistry
Power suppl：3 AA batteries
Power consumption：≤0.2W
Operating temperature：-10-50°C
Working humidity：0-95%RH (no condensation)
NDIR Modules Detect CO Gas-CO detector-CO gas sensor module
CO gas sensor module adopts non dispersive infrared technology, which has the characteristics of high sensitivity, high resolution, oxygen free dependence, stable signal, accurate measurement, low power consumption and long service life. CO gas sensor module has diffusion type and pump type, which can be selected according to the demand.
Measuring range：0-100000ppm (default)
Measurement resolution：1ppm
Response time：<30S(25°C)
Measurement accuracy：±5%F.S(25°C)
Preheat time：<1min(25°C)
Reach accuracy：<3min(25°C)
Operating Voltage：9-24V DC
Average power consumption：<60mA
Working humidity：0~95%RH (non-condensing)
Operating temperature：-10~60°C
CO sensor-Carbon monoxide gas detector
Fixed gas detector, stable performance, sensitive and reliable. With high-precision liquid crystal display, explosion-proof housing, diffusion type or pump suction type. The Carbon monoxide(CO) gas detector has the characteristics of flexible use and simple operation. The Carbon monoxide(CO) gas detector is used in various gas leakage places, such as: city gas, petroleum, chemical, pharmaceutical, steel, special industrial plants and other fields. The explosion-proof level of the CO gas detector is CT6.
measurement range：0-1000ppm
Measurement accuracy：±3% of reading
Output signal：RS485
Baud rate：2400/4800/9600
Resolution：0.5ppm
Power supply：DC 12-24V
Power consumption：<4W
Operating temperature：-20°C- 50°C
