Why pay attention to the application of carbon monoxide detectors
carbon monoxide detector
Carbon monoxide (CO), known as the "silent killer," is a colorless, tasteless, and odorless gas that comes from the incomplete combustion of fuel. Anything that is burned in or around the home—whether it's gasoline, wood, coal, propane, natural gas, or oil—under the right conditions produces carbon monoxide. Without adequate ventilation, the gas can build up to lethal levels. It doesn't take much fuel to become dangerous: Even gadgets like chainsaws emit enough carbon dioxide to make you sick. You can reduce your risk of carbon monoxide poisoning by properly maintaining fuel-burning appliances and using combustible fuels only in well-ventilated areas. Another important step is installing carbon monoxide detectors in your home.
The dangers of carbon monoxide
Carbon monoxide enters the red blood cells and quickly displaces the oxygen the body needs. Your blood then carries the CO to your organs. If you inhale small amounts of CO over a long period of time, the exposure may not be fatal, but it can cause permanent damage to the brain, lungs, and heart. Moderate exposure to CO can cause burning eyes, nausea, vomiting, dizziness, severe headache, difficulty breathing, and confusion. These symptoms can easily be mistaken for other common illnesses, such as food poisoning or the flu. If carbon monoxide starts filling a house while people are sleeping, the exposure could be fatal before anyone realizes there is a problem. Infants, older adults, and people with respiratory and circulatory conditions are at increased risk of fatal carbon monoxide poisoning.
What if my carbon monoxide detector is activated?
If your carbon monoxide sensor goes off, don't panic. First, determine if anyone in your family is feeling unwell. If not, open doors and windows to purify the air, and do not return indoors if the alarm continues to sound. Contact a professional to repair any fuel oil equipment in your home. If anyone develops flu-like symptoms, call 911 or your local emergency services and leave the building immediately.
Why should carbon monoxide detector be installed
In the United States, emergency rooms treat approximately 20,000 people each year for carbon monoxide (CO) exposure, and an average of 400 people die each year from CO exposure. Most non-lethal exposures occur in people's homes, which is why it's important to use a CO detector with or as part of a smoke detector.
Attention to the installation of carbon monoxide detector
Before choosing a carbon monoxide (CO) detector, do some research. Find out if your local laws require you to have a specific type or configuration of carbon monoxide detectors. You'll need to decide whether you want to use a battery-operated or plug-in detector. The plug-in unit plugs into any wall outlet and can be moved to another room if necessary. However, unless your plugged-in device has a battery backup, you're not protected in the event of a power failure. In the case of temporary power outages, this may not seem like a big deal, but imagine a prolonged power outage in winter. You might turn to a portable space heater or wood stove to keep your home warm—exactly the kind of fuel burners that might release carbon dioxide into the air.
Battery-powered units, on the other hand, are often permanently affixed to surfaces in your home. This isn't usually a problem unless your detector mistook other gases for carbon monoxide, causing a false positive and prompting you to move your device. Depending on the size of your home and the number and location of fuel-burning appliances, a combination of types may work best. Follow the manufacturer's instructions for placement, maintenance, and periodic inspections.
Common carbon monoxide monitoring equipment introduction
Indoor CO detector alarm
The CO alarm adopts imported first-line major brand chemical sensors, which have the characteristics of rapid and sensitive response, strong anti-interference ability, long life, high precision, high repeatability and high stability. The carbon monoxide alarm detector is suitable for detecting confined living places: The concentration of carbon monoxide in agricultural greenhouses, production workshops, indoor barbecues, agricultural breeding and other environments.
NDIR Modules Detect CO Gas
CO gas sensor module adopts non dispersive infrared technology, which has the characteristics of high sensitivity, high resolution, oxygen free dependence, stable signal, accurate measurement, low power consumption and long service life. CO gas sensor module has diffusion type and pump type, which can be selected according to the demand.
